OMNIBUS AIO F7 V2 Flight Controller Board and Typhoon 4in1 S ESC 4x30A Race Verison for quadcopter drone
[gallery]
OMNIBUS F7
Features:
F7 MCU - faster than the current F3 and F4 processors
Two gyros on the flight controller: an MPU6000 for sampling up to 8khz and ICM20608 for sampling up to 32khz
Built in betaflight OSD
36x36mm, mount holes 30.5x30.5mm
SD card reader for recording black box data (SD card not included)
Supports 2-4s natively, 5-6s with 220uf 35V capacitor
5v/1A regulator
Port for easy connection to Airbot 4-in-1 esc (SH1.0 8P)
Typhoon 4in1 S ESC
Features:
BB21 MCU, 48Mhz Runs BLHELI_S J_H_xx firmware
Supports 3-6S lipo input
4PWM input
Current and Voltage output
NO BEC
Supports oneshot / Multishot / Dshot PWM
Only 36x36mm, mount holes 30.5x30.5mm Supports damped light
NO External capacitors needed
Different frame will cause different test result with the current, we rated it as the mid-value, in your frame, the current may higher or lower, there is no Guarantee, if you can get same result in your frame.
Package incl.:
1 x Typhoon S Racer 4in1 ESC
1 x OMNIBUS F7 V2 Flight Controller
OMNIBUS F7
Typhoon 4in1 S ESC
[amz_corss_sell asin="B075Q9VVWR"]
Nhận xét
Đăng nhận xét