RJXHOBBY RROSD EVO OSD PDB Power Distribution Board 12V 5V 3A BEC Built in Filter Current 160A works with CC3D Naze32 F3 F4 flight controller for FPV Racing Drone

[gallery]
Feature:
--- Thick copper and wide power routing to handle the most demanding power setup
--- Dimension 36mm x 36mm (30.5mm x 30.5mm mounting holes)， weight:7.4g
--- Built-in power distribution regulators to handle 3S-6S
--- Built in multi stages power filter for Video Transmitter and Camera with pre-installed and conveniently located connectors
--- 12Vandamp;3A and 5Vandamp;3A output: can be used for FPV cam and accessories
--- NTSC and PAL can be easily selected using the onboard button
--- Plug and Play (PnP) OSD information: Flight pack voltage, current draw, total current consumption, RSSI, flight timer, Lap counterandamp;timer
--- Maximum motor current 160A total
--- Automatic flight timer shows actual flight time
--- The additional lost model buzzer sounds off 5 minutes after the quad has crashed.
--- RSSI detection (FRsky ppm and analog compatible) displays in percentage
--- Auto Battery alarm blinks the battery voltage when pack voltage hits the low limit
--- Low RSSI turns on Buzzer (very handy to locate a downed quad)
--- Onscreen menu allows user to calibrate pack voltage reading, current calibration, rssi input, battery alarm level...etc....
--- Lap Timer onscreen counter
--- Lost model Siren (optional Buzzer)

Change Video Mode(NTSC/PAL)
Hold down the Button for 10 seconds upon powering up the RROSD Pro. The LED will flash 5 times to indicate that the Video mode has been successfully changed

More details, pls visit:http://www.rjxhobby.com/rjx-rjx1331

Package Including
1 * RROSD EVO OSD PDB Power Distribution Board
General ------ Thick copper and wide power routing to handle the most demanding power setup.Maximum motor current 160A total. 12V 3A and 5V 3A output. Supports 3S-6S Battery.
Built in multi stages power filter ------ Built in multi stages power filter for Video Transmitter and Camera with pre-installed and conveniently located connectors
NTSC / PAL ------ NTSC and PAL can be easily selected using the onboard button. Hold down the button for 10 seconds upon powering up the RROSD Pro
For CC3D Naze32 F3 F4 flight controller ------ with Dimension 36mm x 36mm (30.5mm x 30.5mm mounting holes), the PDB board is suitable for most flight controller, such as CC3D Naze32 F3 F4 flight controller. It is a good choice for FPV Racing Drone, such as QAV R QAV250 210 180, QAV X X210 X130,ZMR220 250 210 and so on.
Other features ------ Auto Battery alarm blinks the battery voltage when pack voltage hits the low limit. Automatic flight timer shows actual flight time.Low RSSI turns on Buzzer. Lost model Siren.Lap Timer onscreen counter, Plug and Play (PnP) OSD information,etc
[amz_corss_sell asin="B01N1WFGA1"]